Hello, New to the group and looking at an R7 to upgrade to. What post processors do you all use in Vcarve and Fusion 360 for the R7 and tinyG controller.
I too was searching since getting the V9 upgrade to VCarve Pro 9. I had figured it out some time ago, but the upgrade wiped my settings. When you select "Post Processor", scroll down to "TinyG (inch) (*.tap) or the "mm" version, depending if you care cutting in inch or MM.
Correction. I did have (some) success using the TinyG as well as standard "Gcode", but I was given some better files. Hopefully this link will work. These are known good post processor files, directly from the SMW3D R7 "Google Community":